Table of Contents
Advertisement
SETUP MENU (5/5)
4. INFO
1. System information
This enables you to see model number, serial number, firmware versions,
URL path to download the latest firmware and product manuals, state of
the Trial license, all permanently installed licenses and other information
about the product.
2. Storage information
When choosing this function, an information window will show the
internal storage capacity on the microscope and, if connected, the USB
memory stick.
3. System update
See separate section about System Update.
4. Restore factory default settings
Restore the system to the factory default settings, all your personal
settings will be erased, including calibrations and images.
5. Format USB storage
This TAGARNO FHD device is designed to only support USB storages
with a FAT32 formatted file system. If your USB storage does not
currently have this file system, use this function to format the USB
storage. A second pop-up will ask you to confirm your selection. Please
notice that all files on the USB memory stick will be deleted once
formatting begins. Formatting time will vary.
6. Ruler calibration
Perform a linear calibration of the Ruler app using printable TAGARNO
calibration rulers if the mounted lens is not available in the microscope
camera settings. If a calibration is not performed, the Ruler app will be
inaccurate.
Supported lenses are +3, +4, +5, +10 or Plan - 1x.
NB: Make sure to use the calibration ruler matching the mounted lens as
different lenses require different rulers.
NB: The system can only support one +10 lens at a time.
5. OFF
1. Power off
Turn the TAGARNO microscope off.
Menu options, layout and messages might slightly vary from one version
of this microscope to another. Please contact your TAGARNO distributor
if you have any questions regarding your TAGARNO microscope.
14
Advertisement
Table of Contents
