| TaGaRnO FHD zap version: 1.1.2 | 2017-10-30 Contents intended use warnings tips laser pointer warning You have received assembling and connecting operation technical specifications sYstem requirements maintenance warrantY ergonomical recommendations declaration of conformitY...
11. Do not dismantle any parts of the microscope, except where noted in the manual 12. Never disassemble or clean internal optical surfaces 13. Use only the power supply provided from TAGARNO 14. Always turn off the system before unplugging, when possible Warning: This is a Class A product.
6. assemblinG anD cOnnecTinG assemblinG anD cOnnecTinG (1/3) mount the handles on the vesa bracket. connect hdmi cable from the microscope to a monitor connect the power supply to the microscope...
Page 5
assemblinG anD cOnnecTinG (2/3) hdmi cable connect usb 3.0 cable from the microscope to a pc warning! do not connect the hdmi cable to a pc. connect grounding cable to grounding point, to ensure esd of the microscope...
Page 6
assemblinG anD cOnnecTinG | OpTiOns (3/3) connect the microscope to the XKeY control box. detach vesa mount and handles. mount the angle bracket to the microscope. several options.
OpTiOn XKeY cOnTROl bOX control buttons for tagarno fhd functions. XKeY control box for tagarno fhd functions. do only connect equipment distributed by tagarno. do only connect equipment distributed by tagarno. short push switches between iris, gain and preset mode.
Page 8
1. open the osD menu to open the tagarno on screen display menu, press and hold the 8. Flip picture center button for approximately 5 seconds.
9. sYsTem RequiRemenTs FULL HD 1080p @ 59,94/50Hz Desktop Laptop Windows 7, 8 or 10 (with DirectX 11) Memory Intel® Core™ i5 or i7 @2.4GHz, CPU: Intel® Core™ i5 or i7 (3rd or 4th generation named @2.4GHz (4th generation 3xxx or 4xxx) named 4xxx) Hard Disc Space 1GB required (SSD type recommended)
Store and use the microscope in a dry, clean and ventilated room. • Do not place the product in direct sunlight, next to a radiator/heater or some place where the system may be subjected to liquids. • All plugs are designed to be used in one way only. Therefore, you should never use force when you connect the system. • Remember to disconnect all elements if you intend to move the microscope. • If you move the product from a cold to a hot room, you must wait at least an hour before you turn it on, to avoid short circuits due to condensation. • Remove the cables by pulling the plug itself - never by pulling the cable. • If the TAGARNO needs repair, never do it yourself, contact your distributor. • When cleaning the product, please turn off the system and wait untill the system has cooled off. • Clean the product with a damp cloth. Never use strong cleaning agents or chemicals - these may damage the microscope. • Clean the lens regularly with isopropyl alcohol and a microfiber cloth or with our TAGARNO cleaning kit. Warranty 11. waRRanTY Warranty terms for the product shall be as follows: TAGARNO warrants that the product will correspond with the specification at the time of delivery and will be free from defects in material and workmanship for a period of 24 months (2 years) from date of invoice from Supplier.
PHONE +45 76251111 DESCRIPTION TAGARNO A/S hereby declares that the product listed above, consisting of a camera unit and a 12V power supply, is in compliance with the following European directive: EMC DIRECTIVE 2014/30/EU By conforming to the following harmonised standards:...