Bestway LAY-Z-SPA VEGAS Owner's Manual page 15

12.
To heat the water, put the cover on, lock the clips, and push the heat button (see page 18).
WARNING: Do not run the Lay-Z-Massage system when the
cover is attached. Air can accumulate inside the spa and cause
irreparable damage and bodily harm.
WARNING: This spa cover is not a safety cover and is not a
substitute for adult supervision; children must be supervised
around the spa at all times.
Note: We recommend you take a shower
before using your
Lay-Z-Spa, as cosmetic products, lotions,
and other residues on the skin can
quickly degrade water quality.
ASSEMBLY: MIAMI
1.
Spread out the spa and cover and
make sure both are right side up.
4.
NOTE: Do not
use an air
compressor to
inflate the pool.
Use the inflation hose to
inflate the chamber
according to the printed
number 1 on the spa.
Spa
2.
Connect the inflation hose to
adapter A on the pump.
Screw the
screw-valve onto
the air intake
valve marked
with No. 1 on the
spa.
1
(#54123)
Open the top cover of
the screw-valve, insert
the inflation hose and
inflate. Once inflation is
finished, fasten the top
cover of the
screw-valve.
2
15
3.
As previously outlined, test the pump
and press the
Lay-Z-Massage button to activate
the pump.
Test
NOTE: Before use
the Lay-Z-Spa
Miami, always
make sure that the
inflatable chamber
is properly inflated
and that there are
no folds.
Open the top fabric coated
cover and reverse. Insert the
inflation hose onto the valve
to inflate. When the inflation
is finished, close the valve.
Cover
S-S-002097