Dimplex DCACP30DC Instruction Manual page 10

Operation
TIMER - CONTROL PANEL:
The TIMER can be set to automatically turn the unit ON or OFF - up to a maximum
of 12 hours.
To automatically power ON:
1. Press the TIMER button on the control panel and the TIMER set indicator light
will illuminate. The LED Display will flash and start at 1 hour.
2. Turn the dial until the desired time from 1 to 12 hours displays on the LED.
After 5 seconds the LED Display will show the time set for the fan to turn ON
automatically.
3. To re-adjust the timer setting, press the TIMER button once and repeat the above
procedure. Alternatively, to cancel the TIMER, press one more time or set to '0'
hour.
To automatically power OFF:
1. Press the TIMER button on the control panel and the TIMER set indicator light
will illuminate. The LED Display will flash and start at 1 hour.
2. Turn the dial until the desired time from 1 to 12 hours displays on the LED.
After 5 seconds the LED Display will show the time set for the fan to turn OFF
automatically.
3. To re-adjust the timer setting, press the TIMER button once and repeat the above
procedure. Alternatively, to cancel the TIMER, press one more time or set to '0'
hour.
TIMER - REMOTE CONTROL:
Follow the same procedure above, however use the remote control and press the
timer increase & decrease buttons instead of using the dial on the control panel.
10