Download Print this page
Dimplex DCTFTT106 Instruction Manual

Dimplex DCTFTT106 Instruction Manual

106cm led tower fan with remote control

Advertisement

DCTFTT106
106cm LED Tower Fan
with Remote Control
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE UNIT.
www.dimplex.com.au

Advertisement

loading

Summary of Contents for Dimplex DCTFTT106

  • Page 1 DCTFTT106 106cm LED Tower Fan with Remote Control INSTRUCTION MANUAL PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE UNIT. www.dimplex.com.au...
  • Page 2: Table Of Contents

    CONTENTS WARNINGS AND PRECAUTIONS STRUCTURE OPERATION CLEANING AND MAINTENANCE TECHNICAL REFERENCE DATA WARRANTY www.dimplex.com.au...
  • Page 3: Warnings And Precautions

    WARNINGS & PRECAUTIONS Warnings • Never place the unit near gas appliances, flames or flammable liquids. • Never hit or shake the unit. Doing so may cause damage. • Never cover or obstruct the air inlet or outlet. Doing so may cause overheating.
  • Page 4 WARNINGS & PRECAUTIONS • Children should be supervised to ensure they do not play with the appliance. • Avoid electromagnetic interference. Keep the unit at least 1 metre away from electric appliances such as televisions and radios. • Avoid scratching and damaging the surface. Do not use chemical solvents (i.e.
  • Page 5: Structure

    STRUCTURE 1. Control Panel 2. LED display 3. Air outlet 4. Base Control Panel LED Display Panel Air Outlet Base BEFORE FIRST USE • Please read these instructions carefully before use and keep them for future reference. • Check your local main voltage whether it is the same as stated on the appliance.
  • Page 6: Operation

    OPERATION ASSEMBLY The base of the tower fan comes in two parts, which fit around the oscillation base. Both parts fit easily together. The back half has cut-outs for the power supply cord. 1. Attach the front half of the base, aligning the holes in the base with the screw holes in the fan base.
  • Page 7 OPERATION This tower fan can be operated by the control panel or remote control. Please refer to the below diagrams for descriptions. 头盖内容 Control Panel LED Display Power On/Off Mode Oscillation On/Off Speed Timer Normal mode indicator Remote Control Natural mode indicator Sleep mode indicator...
  • Page 8 OPERATION 1. Place the fan on a flat stable surface. Plug into an electrical outlet and press the “Power On/Off” button to turn the unit “On”. The current room temperature will show on the LED display. 2. Adjust the fan speed by pressing the “Speed” button. There are three speeds - Low, Medium &...
  • Page 9 OPERATION MODES: Normal: When this mode is selected, the fan will operate as normal, in the settings selected. Natural: This mode cycles through Low, Medium, High for 5 seconds each. Sleep: Low Speed - the fan will work at this speed without change until it is turned off (either manually or by the timer).
  • Page 10: Cleaning And Maintenance

    CLEANING & MAINTENANCE CLEANING Over time, dust can accumulate on the fan, which can affect the perfor- mance. It is recommended to clean the fan at least once a month. 1. Turn the unit OFF and disconnect the appliance from the main power supply.
  • Page 11: Technical Reference Data

    The warranty period is 12 months from the date of purchase. For service advice, please contact the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ). Glen Dimplex Australia Pty Ltd Glen Dimplex New Zealand Ltd 1340 Ferntree Gully Road,...