Page 1
Original Bulletin: Matrix 7xi NB-1407002, Ver. 3 ESCRIPTION Use this guide to troubleshoot a 7xi console. Tables are organized by symptoms: Table 1 – Picard/GUI Application Crash or Frozen Screen Table 2 – Error Message Table 3 – Issue Running App...
Page 2
Error code 04B0 Error code 04B0 Netpulse installation fails No tuner found (Hauppauge) No tuner found (AverMedia) Windows Boot Manager Table 3: 7xi Console – Issue Running App Reboot Check Check coax Check Clear Delete Delete Install Reinstall Rewrite...
Page 3
Return to Top White screen when trying to watch live TV ROUBLESHOOTING STEPS The troubleshooting steps below are arranged alphabetically by title. Check Coax Connections 1. To check coax connections: Run a channel scan to verify the tuner picks up all channels.
Page 4
<Figure 6> <Figure 6>. 12. Press Enter 3 0 0 1 Enter to enter 7xi Service Mode. Check if there is a valid IP address in the Network Setup fields <Figure 5>.
LCB. b. If not blinking, replace the console. Check Netpulse Installation 1. Press Enter 3 0 0 1 Enter to open the 7xi Service Mode. 2. Tap or click Netpulse. <Figure 10> 3. If you see the following message, “This machine has never been installed on the Netpulse network”, then your machine will need to be...
Page 6
Return to Top Press Enter 3 0 0 1 Enter to enter Service Mode, then press the TV tab. Press Delete All Channels. This button is located underneath the Channel List <Figure 12>. Delete Netpulse File 1. Follow these steps to set up the computer accessories: a.
Page 7
Return to Top Close all windows. 3. Test a. Relaunch the 7xi application. b. Test the TV audio. Reboot, Then Update Current Software Version Instructions for upgrading to V3.2.6 (all cases) Press Enter 7 3 2 6 6 8 Enter to reboot the system.
Page 8
<Figure 25> returns to the standard display, turn off the machine. 9. Wait 30 seconds before turning on the machine. 10. Perform the 7xi TV channel setup. 11. Test the console. Reinstall TV Tuner Drivers If the touchscreen does not respond, begin with step 1. If the <Figure 26>...
Page 9
Return to Top 8. Press Enter 732668 Enter on the start screen to reboot the console. 9. Test the console. Replace Inverter and Inverter Wire 1. Remove four (4) screws from the back of the console and set the cover aside. 2.
Page 10
Return to Top a. Plug the good CF card with the good 7xi OS into the card reader. b. Download the HDD Raw Copy tool (portable) from hddguru.com <Figure 33>. http://hddguru.com/software/HDD-Raw-Copy-Tool/ c. Open “HDDRawCopy1.10Portable.exe” <Figure 34>. d. Select the source CF card from the list <Figure 35>.
Page 11
Repeat (h) through (k) to collect the logs labeled System and Administrative Events. n. Exit all applications. o. Return the console to 7xi home screen. 11| Revision Date: 11/10/15 | Revised by: Emilie McWilliams p. Eject the computer accessories.
Page 12
Return to Top 4. Email Johnson Health Tech North America - Customer Tech Support: a. Attach the customer’s error records. b. Attach the Windows logs. c. Include the case number in the subject line. d. Address the message to the CTS representative who dispatched your case.
Need help?
Do you have a question about the 7xi and is the answer not in the manual?
Questions and answers