Advertisement
Quick Links
Advertisement
Related Manuals for Saxby Lighting 13826
Summary of Contents for Saxby Lighting 13826
- Page 1 Aretz Adjustable MH Recessed 13826...
- Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Existing fittings must be completely removed before installation of a new product. Before removing the existing Please retain these instructions for future reference.
- Page 3 Commissioning Fit the reflector carefully back into the fitting, and adjust to direction to suit. Pull the wiring through the glands, then tighten them properly. Adjust the cable(s) so it does not get snagged. Fit the product into the housing. Refit the the four self tapping screws. 10. Refit the seal and shade. Ensure that the seal has the small ridges facing down as shown (See Fig. 6). 11. Refit the bezel and the four allen screws as shown (See Fig. 6). 12. Replace fuse or circuit breaker and switch on. Your light is now ready for use. Fitting / Replacing Bulbs ...
Need help?
Do you have a question about the 13826 and is the answer not in the manual?
Questions and answers