Recommended Rf Connector For Antenna Installation - Quectel BC66 Hardware Design

NB-IoT Module Series
BC66 Hardware Design

4.8. Recommended RF Connector for Antenna Installation

If RF connector is used for antenna connection, it is recommended to use the U.FL-R-SMT connector
provided by HIROSE.
Figure 28: Dimensions of the U.FL-R-SMT Connector (Unit: mm)
U.FL-LP serial connectors listed in the following figure can be used to match the U.FL-R-SMT.
Figure 29: Mechanicals of U.FL-LP Connectors
BC66_Hardware_Design 41 / 57