2: Adjusting The Viewing Angle Of The Tv - Sony KDL-32EX725 Service Manual

Detaching the Table-Top
Stand from the TV
To detach the Table-Top Stand from the
TV, remove the screws
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
• When installing the TV on a wall, remove the
screws from the rear of the TV. The screws and
number of screws depends on the TV model.
(They are fastened in the screw holes for wall
mounting.) Be sure to store the removed
screws in a safe place, keeping them away
from children.
• When attaching the Table-Top Stand again, be
sure to fasten the screws (previously removed)
to the original holes on the rear of the TV.
• For instructions on using the Wall-Mount
bracket with your TV please go to
http://esupport.sony.com for your TV model
and download "Additional Information for
Using Sony Wall-Mount Bracket".
2: Adjusting the viewing
angle of the TV
This TV can be adjusted within the angles
as illustrated.
Angle adjustment (Swivel)
~
• When adjusting the angle, hold the stand with
one hand to avoid having the stand slip or TV
tip over.
B KDL-55/46/40/32EX72x, KDL-46EX52x
fixed in step 2.
B KDL-40/32EX52x and KDL-32EX42x
Angle adjustment (Tilt)
(except KDL-40/32CX52x)
~
• Be careful not to pinch your fingers between
B KDL-55/46/40/32EX72x and
and KDL-40/32CX52x
20°
20°
15°
15°
the TV and stand when adjusting the angle.
KDL-46EX52x
20°
20°
15°
15°
0° - 6°
11
(Continued)