SECTION 3 - CHASSIS OVERVIEW
OVERVIEW
The primary circuits contained in the AZ2-F chassis for the consists of a Main Board (designated as the BATV board), Power Supply Board
(designated as the G10A Board for the 32" models, G4B Board for the 40" models, and G6A Board and G8A Board for the 55" models), the Motion
Sensor (HMS3 Board), the IR Board (HLR2 Board), the Switch Unit, and the LCD Panel assembly.
NOTE: For connector part number information, refer to
KDL-32EX725/40EX725/55EX725
"Connectors" on page
G10A
SWITCH
UNIT
HEM2
FIGURE 3-1. BOARD LAYOUT FOR KDL-32EX725
62. For Wire Dressing information, refer to
LD
BATV
TCON
HLR2
"Wire Dressing" on page
HMS3
65.
15