Protection Shutdown; Standby Led Flash Count - Sony KDL-32EX725 Service Manual

PROTECTION SHUTDOWN

Self Diagnosis
Supported model
The models in this manual contain a self-diagnostic function. If an
error occurs, the standby LED will automatically begin to flash. The
number of times the LED flashes translates to a probable source of
the problem.
A history of the errors is stored on the Self Check diagnostic page as
shown in "Figure 4-4. Sample Self Check Diagnosis Page" on page
35. This page can be used to review the failure occurrence data stored
in memory to reveal past problems and how often these problems
occured. If there is more than one error, the standby LED will identify
the first of the problem areas. If the Self Check screen displays a "0",
no error has occurred.
KDL-32EX725/40EX725/55EX725
SECTION 4 - TROUBLESHOOTING

STANDBY LED FLASH COUNT

LED ON 0.3 sec.
LED OFF 0.3 sec.
Ambient Sensor/ Picture Off / Standby LED
(IR) Infrared Receiver Timer LED
FIGURE 4-1. LED DISPLAY
2 times
5 times
LED OFF
3 sec.
FIGURE 4-2. BLINK COUNT
Power LED
30