Indicator Lights And Warning; Lights - Yamaha TMAX Owner's Manual

Instrument and control functions
sidestand up and while applying the
front or rear brake, push this switch to
crank the engine with the starter. See
page 7-2 for starting instructions prior
to starting the engine.
Hazard switch " "
With the vehicle power is on or in park-
ing mode, use this switch to turn on the
5
hazard lights (simultaneous flashing of
all turn signal lights).
The hazard lights are used in case of an
emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
Cruise control switches
See page 4-1 for an explanation of the
cruise control system.
Menu switch "MENU"
This switch is used to make setting
changes within the multi-function dis-
play. (See page 5-5.)
EAU79601 Select switch "
This switch is used to make setting
changes within the multi-function dis-
play. (See page 5-5.)
Drive mode switch "MODE"
See page 4-3 for an explanation of the
drive mode.
ECA10062
EAU73951
EAU77301

Indicator lights and warning

lights

EAU77311
/ "
EAU73931
1. High beam indicator light "
2. Traction control system indicator
3. Turn signal indicator lights "
4. Smart key system indicator light "
5. ABS warning light "
6. Malfunction indicator light "
7. Cruise control indicator lights (XP560D)
Turn signal indicator lights "
and "
Each indicator light will flash when its
corresponding turn signal lights are
flashing.
5-2
3 3
1 2 1 2
7 7
"
light " "
" and "
"
"
EAU77122
4 5 6 4 5 6
"
"
"
EAU88680
"