Yamaha TMAX Owner's Manual page 113

7. Inputting the identification number
is done by counting the number of
flashes of the smart key system in-
dicator light.
For example, if the identification
number is 123456:
Push and hold the "
↓
The smart key system indicator
light will start to flash.
↓
Release the " / " switch after
the smart key system indicator
light flashes once.
↓
The first digit of the identification
number has been set as "1".
↓
Push and hold the "
again.
↓
Release the "
/ " switch.
the smart key system indicator
light flashes twice.
↓
The second digit has been set as
"2".
↓
Repeat the above procedure until
all digits of the identification num-
ber have been set. The smart key
system indicator light will come on
for 10 seconds if the correct iden-
tification number was entered.
TIP
Emergency mode will be terminated
when either one of the following situa-
tions apply. In this case, start over
again from step 4.
/ " switch
 When there are no "
operations for 10 seconds during
the identification number input
process.
Periodic maintenance and adjustment
/ " switch after
/ " switch
8-39
 When the smart key system indi-
cator light is allowed to flash 9 or
more times.
8. Press the "ON/ " switch while
the smart key system indicator
light is on to turn on the power to
the vehicle. The engine can now
be started.
TIP
 If the identification number is not
correctly entered, the smart key
system indicator light will flash
rapidly for 3 seconds and emer-
gency mode is terminated. In this
case, start over again from step 4.
 To lock the handlebar after turning
on the vehicle in emergency
mode, turn the vehicle power off,
wait 30 seconds, and then turn the
handlebar to the left and press the
"OFF/LOCK" switch.
8