NOTICE
Be sure to wear protective
clothing that covers your hip
and legs when using the seat
heater.
If the ambient temperature is 20
°C (68 °F) or higher, do not set
the seat heater to the high set-
ting.
If the seat becomes worn or
damaged, stop using the seat
heater and replace the seat.
Changing the information display
The information display items are
grouped into 3 display pages.
Push the "
" or "
ECA23980
lect switch to rotate among the 3 dis-
play pages.
TIP
The items for each display page can be
customized. (See page 5-15.)
Odometer:
The odometer shows the total distance
traveled by the vehicle.
Tripmeters:
"TRIP1" and "TRIP2" show the dis-
tance traveled since they were last set
to zero.
Instrument and control functions
" side of the se-
To reset a tripmeter, use the select
switch to select the information display
page that contains the tripmeter you
want to reset. Push the "
the select switch for one second so
that the tripmeter flashes, and then
push the "
again for one second while the tripme-
ter is flashing.
TIP
The odometer will lock at 999999.
The tripmeters will reset and con-
When approximately 3.0 L (0.79 US
gal, 0.66 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter starts flashing. In addition, the
information display will automatically
change to the fuel reserve tripmeter
mode "F-TRIP" and start counting the
distance traveled from that point.
5-9
" side of
" side of the select switch
tinue counting after 9999.9 is
reached.
5