Periodic maintenance and adjustment
NO.
ITEM
12 * Tires
13 * Wheel bearings
14 * Drive belt
Drive pulley and
15 *
drive axle
8
16 * Steering bearings
17 * Chassis fasteners
Front and rear
18
brake lever pivot
shaft
Sidestand, center-
19 *
stand
20 * Sidestand switch
CHECK OR MAINTENANCE JOB
• Check tread depth and for dam-
age.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
• Check bearing for looseness or
damage.
• Check belt condition.
• Replace if damaged.
• Check belt tension.
• Adjust if necessary.
• Lubricate.
• Check bearing assemblies for
looseness.
• Moderately repack with lithium-
soap-based grease.
• Make sure that all nuts, bolts and
screws are properly tightened.
• Lubricate with silicone grease.
• Check operation.
• Lubricate with lithium-soap-
based grease.
• Check operation and replace if
necessary.
ODOMETER READING
1000 km
10000 km
20000 km
(600 mi)
(6000 mi)
(12000 mi)
√
√
√
√
At the initial interval and every 10000 km (6000 mi) until 40000 km (24000 mi),
and every 5000 km (3000 mi) thereafter.
√
√
√
√
√
√
√
√
√
√
√
√
√
8-6
ANNUAL
30000 km
40000 km
CHECK
(18000 mi)
(24000 mi)
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√