Periodic maintenance and adjustment
1. Panel A
3. Remove the panel as shown.
8
To install the panel
1. Insert the tabs on the upper left
and right sides of the panel.
2. Align the center and lower projec-
tions and then push the panel into
its original position.
1
3. Install the screws.
Panel B
To remove the panel
1. Remove the screw.
1
2
1. Panel B
2. Screw
8-10
2. Gently pry up the upper portion of
the panel, and then slide the panel
upwards.
To install the panel
Place the panel in the original position,
and then install the screw.
Panel C
To remove the panel
Remove the screws, and then pull the
panel outward.