Using The Self-Cleaning Cycle; Before Setting The Controls; Setting The Controls - Whirlpool KEBS177D Use And Care Manual

U
sing the Self-Cleaning Cycle

Before setting the controls

•
Make sure clock is set to
correct time of day. The clock
cannot be set during the Self-
Cleaning cycle.

Setting the controls

NOTE: These examples are for double
upper ovens only. Other ovens may look
slightly different.
To start cleaning immediately:
1. Press Clean pad.
A 3 1 ⁄ -hour Self-Cleaning cycle will be
2
set. (The first 3 hours are for cleaning,
the last 30 minutes are for cooling.)
NOTE: On double ovens, the cavity
symbol flashes to tell you which oven you
are setting. The electronic control will
not let both ovens be active while one
oven is cleaning.
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle other
than 3 1 ⁄ hours, press the desired
2
Number pads for the new time from
2 1 ⁄ to 4 1 ⁄ hours.
2 2
•
Use 2 1 ⁄ hours for light soil.
2
•
Use 3 1 ⁄ -4 1 ⁄ hours for moderate
2 2
to heavy soil.
48
•
Make sure the oven door is
completely closed.
PRESS YOU SEE
to select
(stop time display shows time
oven (for 1
3 ⁄ hours later than time of day –
2
double
shown in start time display)
ovens)
PRESS
CLEAN
PRESS YOU SEE
4
0
(example shows 4-hour cleaning
cycle with stop time now 4 hours
later than time of day)
0
DELAY
NIGHT LIGHT
SET PROBE TEMP
RAISING
BREAD
DEHYDRATE AT
ON
ENTER STANDARD
CONTROL
COOK TEMP CLEAN TIME
DOOR LOCKED
NIGHT LIGHT DELAY
SET
PROBE TEMP
RAISING
BREAD
DEHYDRATE AT
ON ENTER STANDARD
CONTROL
COOK TEMP CLEAN TIME
DOOR LOCKED
START
TIME
STOP
TIME
LOCK
START ?
START
TIME
STOP
TIME
LOCK
START ?