Dryer Use; Starting Your Dryer; Stopping And Restarting - Whirlpool W10151595B Use & Care Manual

240-volt electric compact dryer
Table of Contents

Advertisement

WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
WARNING: To reduce the risk of re, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Clean the lint screen before each load. See "Cleaning the Lint
Screen."
2. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
3. Turn the Cycle Control knob to the recommended cycle for
the type of load being dried. Use the Perm Press Energy
Preferred Automatic Setting ( ) to dry most heavyweight and
medium weight loads. See "Drying, Cycle, and Temperature
Tips."
14

DRYER USE

Starting Your Dryer

*
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
4. Press PUSH TO START.

Stopping and Restarting

You can stop your dryer anytime during a cycle.
To stop your dryer
Open dryer door or turn Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off
area when dryer is not in use.
To restart your dryer
1. Close the door.
2. Select a new cycle and temperature (if desired).
3. Press PUSH TO START button.
Drying, Cycle, and Temperature Tips
Select the correct cycle and temperature for your load.
Your dryer tumbles the load without heat during the last few
minutes of all cycles to make the load easier to handle.
Drying tips
Follow care label directions when they are available.
If desired, add a fabric softener sheet. Follow package
instructions.
Remove load from the dryer as soon as tumbling stops to
reduce wrinkling. This is especially important for permanent
press, knits, and synthetic fabrics.
I
I
I

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

 ler3622pq

Table of Contents