Fig. 3-6: Han Q8 Power Connector; Table 3-4: Assembling And Wiring Power Connectors - Siemens ECOFAST Manual

Han Q8 power connectors
The power connectors belonging to a power tee connector and to the motor
starter consist of the following components:
Han Q8 socket
for connecting the main power
Contact sockets
Socket insert

Fig. 3-6: Han Q8 power connector

Assembling and wiring power connectors
Assemble and wire the power connectors according to the following instruc-
tions:
Step
1 Guide the cable through the heavy-gauge threaded joint, the matching
enclosed sealing ring in each case and the connector housing.
2 Attach the jacks / contact pins to the strands
3 Push the jacks / contact pins into the socket insert / pin insert until they
snap into place.
4 Pull the cable back and screw the insert in place in the connector housing
with the enclosed screws.
5 Screw the heavy-gauge threaded joint tight.

Table 3-4: Assembling and wiring power connectors

ECOFAST Motor Starters
GWA 4NEB 950 0562-12
Connector housing
Procedure
Wiring and interfaces
Han Q8 pin
for looping through the main power
Connector housing
Contact pins
Pin insert
3-11