Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Note: Blade sold separately.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19j
Advertisement
Table of Contents
Related Manuals for Chicago Electric 56776
Summary of Contents for Chicago Electric 56776
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 Distractions There is an increased risk of electric shock can cause you to lose control. if your body is earthed or grounded. Page 2 For technical questions, please call 1-888-866-5797. Item 56776...
- Page 3 Power tools are principles. A careless action can cause dangerous in the hands of untrained users. severe injury within a fraction of a second. Item 56776 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Workpieces longer or wider than the mitre saw table can tip if not securely supported. If the cut-off piece or workpiece tips, it can lift the lower guard or be thrown by the spinning blade. Page 4 For technical questions, please call 1-888-866-5797. Item 56776...
- Page 5 The braking action of the saw may cause the saw head to be suddenly pulled downward, causing a risk of injury. Item 56776 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 * Based on limiting the line voltage drop to five volts at sure it is marked with the suffix “W-A” (“W” in 150% of the rated amperes. Canada) to indicate it is acceptable for outdoor use. Page 6 For technical questions, please call 1-888-866-5797. Item 56776...
- Page 7 Mounting Use the four bolt holes provided in the Base to mount the Miter Saw to a stable support before use. Mounting hardware not included. Item 56776 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Functions Trigger Lock Trigger Dust Collection Lower Guard Blade (sold separately) Clamp Sliding Fence Turntable Miter Lock Table Miter Extension Miter Scale Kerf Board Knob Page 8 For technical questions, please call 1-888-866-5797. Item 56776...
- Page 9 Lower Guard. Note: Additional functions are explained elsewhere in the manual. Align pin with Align pin with deep groove shallow groove to lock cutting head. to unlock cutting head. Item 56776 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 9. Rotate the Guard Pivot Plate (5) back into place, and secure it with the Guard Pivot Bolt (109). 10. WARNING! Make sure the Lower Guard (8) operates smoothly and properly protects from the Blade before using the saw. Page 10 For technical questions, please call 1-888-866-5797. Item 56776...
- Page 11 5. Make a sample cut in a piece of scrap to Bevel confirm that the bevel angle is correct. Lock If it is not, correct the angle before cutting. Lever Bevel Indicator Figure C Item 56776 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Clamping the workpiece will also improve cutting accuracy by preventing the workpiece from moving during the cutting operation. Page 12 For technical questions, please call 1-888-866-5797. Item 56776...
- Page 13 5. Hold the work material in place using the Clamp. Ensure that the work material is level and supported securely, use saw horses or supports if necessary. Item 56776 For technical questions, please call 1-888-866-5797. Page 13...
- Page 14 Repeat the process until the Fence is adjusted accurately. 6. Once the Fence is accurately adjusted, tighten the bolts firmly in place. Recheck one last time, then proceed to work. Page 14 For technical questions, please call 1-888-866-5797. Item 56776...
- Page 15 Bevel Angle at 45º left. 4. Ensure that the left side of the Blade clears the Kerf Board. 5. Tighten the four screws holding the Kerf Board in place. Item 56776 For technical questions, please call 1-888-866-5797. Page 15...
- Page 16 Depth Stop set too shallow. Adjust Depth Stop Bolt for desired depth of cut. cut completely through workpiece. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 16 For technical questions, please call 1-888-866-5797. Item 56776...
- Page 17 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 56776 For technical questions, please call 1-888-866-5797. Page 17...
- Page 18 Bolt St4.2x 50 Anti-Overturn Support Bearing 6000 Bolt M6× 16 Rotor Base Bearing 6202 Extension Bar Fan Shroud Bolt M8x25 Spring Rubber Foot Lock Button Guard Pivot Bolt M6x10 Thumb Pad Page 18 For technical questions, please call 1-888-866-5797. Item 56776...
- Page 19 Assembly Diagram Item 56776 For technical questions, please call 1-888-866-5797. Page 19...
- Page 20 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.