Chicago Electric 56708 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Saw
  5. 56708
  6. Owner's manual & safety instructions

Chicago Electric 56708 Owner's Manual & Safety Instructions

10 in. sliding compound miter saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Note: Blade sold separately.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19i

Advertisement

Table of Contents
loading

Related Manuals for Chicago Electric 56708

Summary of Contents for Chicago Electric 56708

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Important Safety Information

    Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Page 2 For technical questions, please call 1-888-866-5797. ITEM 56708...
  • Page 3 Power tools are dangerous in the hands of untrained users. ITEM 56708 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Workpieces longer or wider than the mitre saw table can tip if not securely supported. If the cut-off piece or workpiece tips, it can lift the lower guard or be thrown by the spinning blade. Page 4 For technical questions, please call 1-888-866-5797. ITEM 56708...
  • Page 5 The braking action of the saw may cause the saw head to be suddenly pulled downward, causing a risk of injury. ITEM 56708 For technical questions, please call 1-888-866-5797. Page 5...

  • Page 6: Grounded Tools: Tools With Three Prong Plugs

    If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See 3-prong plug and Outlet.) Page 6 For technical questions, please call 1-888-866-5797. ITEM 56708...

  • Page 7: Extension Cords

    Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning n 0 xxxx/min. No Load Revolutions per Minute (RPM) Risk of Electric Shock. Properly connect power cord to appropriate outlet. ITEM 56708 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 0°  – 45° Right Blade Tilt Range and Left Miter 0°  – 45° left Scale 1° per scale mark List of contents Description Compound Sliding Miter Saw Table Extensions Dust Collection Bag Wrench Page 8 For technical questions, please call 1-888-866-5797. ITEM 56708...

  • Page 9: Mounting The Saw

    There are bolt holes provided in each of the four legs of the base. These should be firmly mounted using bolts (not included) to your saw stand or saw table (not included). ITEM 56708 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 Lower Guard Workpiece Extension Bevel angle Blade Support indicator Fence clamp Sliding Fence table Miter Handle Kerf Board Miter angle Workpiece indicator Extension Miter Lock Support Handle Figure a: components Page 10 For technical questions, please call 1-888-866-5797. ITEM 56708...

  • Page 11: Work Piece And Work Area Set Up

    30º, 45º, and 90º on both left and right sides. With the Table adjusted to the desired angle, place the work piece flush against the Fence, secure it with the Hold Down Clamp and make the cut. ITEM 56708 For technical questions, please call 1-888-866-5797. Page 11...

  • Page 12: Adjusting The Bevel Angle

    Bevel Lock Lever. Making bevel cuts is discussed in more detail later in this manual. Page 12 For technical questions, please call 1-888-866-5797. ITEM 56708...

  • Page 13: Making A Cut

    —   u se light downward pressure. disconnect its power supply after use. Clean, If the material binds the blade, release the Trigger. then store the tool indoors out of children’s reach. ITEM 56708 For technical questions, please call 1-888-866-5797. Page 13...

  • Page 14: Cleaning, Maintenance, And Lubrication

    Dull blades will cause increased tear-out WarNiNG! if the supply cord of this and ragged edges on the cuts. power tool is damaged, it must be replaced only by a qualified service technician. Page 14 For technical questions, please call 1-888-866-5797. ITEM 56708...

  • Page 15: Replacing The Blade

    Rotate the Center Cover back into place and tighten the Center Cover Fixing Bolt using the Wrench by turning it clockwise. Release the Locking Pin. Figure E: raise Blade Guard ITEM 56708 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Adjusting The Fence

    Angle at 45º left. Ensure that the left side of four screws and tighten them slightly. the Blade clears the Kerf Board. Tighten the four screws holding the Kerf Board in place. Page 16 For technical questions, please call 1-888-866-5797. ITEM 56708...

  • Page 17: Troubleshooting

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. ITEM 56708 For technical questions, please call 1-888-866-5797. Page 17...

  • Page 18: Parts List

    Screw St4.2*12 Carry Handle Line Buckle Screw M5*50 Screw M6*10 Screw St4.2*14 Knob Cable Pad Self-Locking Pin Spring Cable Self-Locking Pin Cable Sheath Elastic Cylindrical Pin Screw St4.2*18 Screw M6*8 Page 18 For technical questions, please call 1-888-866-5797. ITEM 56708...

  • Page 19: Assembly Diagram

    Diagram ITEM 56708 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents