Introduction - Jay FUSION Owner's Manual

JAY ®

INTRODUCTION

Sunrise Medical recommends that a clinician such as a doctor or
therapist experienced in seating and positioning be
consulted to determine if a JAY Fusion Cushion is appropriate.
Cushions should only be installed by an Authorized Sunrise
Medical Dealer.
JAY FUSION CUSHION
The Fusion cushion is designed to help reduce pressure.
However, no cushion can completely eliminate sitting pressure or
prevent pressure sores. The Fusion cushion is not a substitute for
good skin care including: proper diet, cleanliness, and regular
pressure reliefs.
The JAY Fusion Cushion is designed for clinicians to use with
clients who need superior pressure distribution and stability. The
Fusion Cushion offers a complete solution to meet a large range
of skin protection and positioning needs.
The JAY Fluid with Cryo Technology Insert, the Air Insert, and
the JAY Flow Fluid Insert are all interchangeable pelvic loading
area (PLA) options for the Fusion Cushion.
Maximum user weight:
14" to 21" width = 300 lbs
22" to 24" width = 500 lbs
A. CUSHION ADJUSTABILITY
Fluid and Air Adjustability
The Fusion Cushion offers volume adjustability to accommodate
for user's needs through the determination of the correct
amount of fluid made by your clinician during evaluation.
The determination of Air Single or Air Dual models is also
made by your clinician during evaluation. The inserts should only
be changed at the direction of your clinician.
JAY FUSION CORE
Outer Cover
Fluid Insert
Dual Layer
Foam Base
JAY FUSION COMPONENTS
Outer Cover
Fluid Insert
Air Insert
Moisture-
Resistant
Inner Cover
Dual Layer
Foam Base
Obliquity Pads
JAY FUSION WITH POSITIONING
Outer Cover
Fluid Insert
(Air Insert
not shown)
Lateral Thigh
Support
Medial Thigh
Support
Moisture-
Resistant
Inner Cover
Dual Layer
Foam Base
4
FUSION Cushion
III. INTRODUCTION
Pelvic Thigh
Support
121985 Rev E