Elma Elmasonic S Series Operating Instructions Manual page 16

Product description
Action
start ultrasound
- temperature-controlled*;
with mixing of cleaning
liquid –
* if set temperature >
actual temperature;
applies only for units with
heating
stop ultrasound before
end of set period
switch on heating*
* applies only for units
with heating
16
Setting
set period
set temperature by
turning knob for
temperature
■
keep key ►
pressed for > 2 sec
turn set period to 0
or
■
press key ►
select set
temperature
BA_Elmasonic S_EN_Vers. 05.2019
Result
heating operates
ultrasound is started
automatically after
reaching the set
temperature
set period ultrasound
runs down
ultrasound switched
off
heating operates
Display
ultrasound LED blinks
S 10 H: ultrasound
LED blinks until the
set temperature is
reached; the LED is
on as soon as the
ultrasound is
activated
S 15 H – S 900 H:
set period LED blinks
as soon as the set
temperature is
reached the
ultrasound LED is on
set period LED is on
remaining period LED
blinks
ultrasound LED is off
S 15 – S 900 H: set
period LED is on
S 10 H: temperature
LED is on; it moves
out when the set
temperature is
reached
S 15 – S 900 H: set
temperature LED is
on
actual temperature
LED blinks and goes
towards set temp.
as soon as actual
temp. = set temp.,
only the set temp.
LED is on
if actual temperature
> set temperature, the
temperature LED
starts blinking again
© Elma Schmidbauer GmbH