Related Manuals for APV AS 600 M1
Summary of Contents for APV AS 600 M1
- Page 1 Version: 1.2 EN / Item no.: 00601-3-426 Tined Weeder operating manual AS 600 M1, AS 900 M1, AS 1200 M1 Please read carefully before initial operation! TRANSLATION OF THE ORIGINAL OPERATING MANUAL...
-
Page 2: Table Of Contents
Implement description ....................10 Mounting on the tractor .................... 10 Safe parking AS 600 M1 / AS 900 M1 rigid .............. 10 Safe parking AS 900 M1 scissors folding / AS 1200 M1 ........... 11 Test folding of the Tined Weeder (with hydraulic folding) ......... 12 Working position and setting the working depth ............ -
Page 3: Ce Conformity
Dallein 15, A-3753 Hötzelsdorf Product designation: Tined weeder AS 600 M1 Number: 07017-1-000 Serial number: All serial numbers of the Tined Weeder AS 600 M1 Product designation: Tined weeder AS 900 M1 Number: 07016-1-000 Serial number: All serial numbers of the Tined Weeder AS 900 M1... -
Page 4: Identification Of The Implement
Figure 2: Layout of the type plate Year of manufacture PLEASE NOTE! In cases of inquiries or warranty claims, please tell us the production number of your implement. Page 4 Translation of the original operating manual - APV Tined Weeder... -
Page 5: Service
The implement may only be used, maintained and repaired by persons who have relevant experience and were instructed on the risks. The safety instructions must also be handed over to other users. Page 5 Translation of the original operating manual - APV Tined Weeder... -
Page 6: General Safety-Related Instructions And Accident Prevention Regulations
Cleaning is recommended as specified in the maintenance instructions. The procedure in in maintenance instruction must be observed and protective equipment must be used. Working under the implement is forbidden. Page 6 Translation of the original operating manual - APV Tined Weeder... -
Page 7: Risks Involved With Use (Mounted Implement)
Before working on the hydraulic system, park the implement, depressurize the system and switch off the motor! The securing chains should only be unhooked when they are relieved of tension! (cylinder must be filled with oil) Page 7 Translation of the original operating manual - APV Tined Weeder... -
Page 8: Risks Involved With Maintenance (Maintenance, Tyres)
Pay special attention to the stickers on the implement, as they warn you of specific dangers! Lift the implement off the Standing in the danger zone Caution, risk of crushing! ground and slowly fold or (swivelling range) is unfold. forbidden! Page 8 Translation of the original operating manual - APV Tined Weeder... - Page 9 After a short period of operation, re-tighten all bolts and nuts. Page 9 Translation of the original operating manual - APV Tined Weeder...
-
Page 10: Operating Instructions For The Tined Weeder
6.1 Implement description The Tines Weeder AS 600 M1 | AS 900 M1 | AS 900 M1 scissors folding | AS 1200 M1 is a soil tillage implement that can be hitched onto a towing vehicle on the three-point hitch. -
Page 11: Safe Parking As 900 M1 Scissors Folding / As 1200 M1
(if equipped), which is located on the folding cylinder, must also be locked. Then the pressure in the hydraulic hoses to the tractor must be relieved. Figure 7 Figure 8 Page 11 Translation of the original operating manual - APV Tined Weeder... -
Page 12: Test Folding Of The Tined Weeder (With Hydraulic Folding)
The tine adjustment and the extended length of the top link have to be changed accordingly here as well. Page 12 Translation of the original operating manual - APV Tined Weeder... -
Page 13: Hydraulic Tine Adjustment (Optional)
Page 13 Translation of the original operating manual - APV Tined Weeder... -
Page 14: Road Transport Of The Tined Weeder
Distance from the centre of the lower link ball to the centre of gravity of the rear-mounted implement (d = 72 cm, d = 74 cm, AS 600 AS 900 = 105 cm) AS 1200 Page 14 Translation of the original operating manual - APV Tined Weeder... - Page 15 CAUTION! The minimum ballast must be attached to the tractor as a mounted implement or ballast weight! The calculated values may not be higher than the permissible values! Page 15 Translation of the original operating manual - APV Tined Weeder...
-
Page 16: Maintenance And Care
Hydraulically as well as mechanically folded implement must only be parked in a folded state. Put down the implement in a way that the tines are not needlessly strained. Occasionally check the tyre inflation pressure (tyres 18x8.50 approx. 3 bar). Page 16 Translation of the original operating manual - APV Tined Weeder... -
Page 17: Changing The Tines
8.2 Repairs and service In case of failure or damage to the Tined Weeder, please contact the manufacturer. The contact data can be found in chapter 2 Service. Page 17 Translation of the original operating manual - APV Tined Weeder... -
Page 18: Technical Data
+ Sensor set - GPSa + top link linkage sensor (sensors for combination with pneumatic seeder) PS 120 M1 – PS 500 M2 (see chapter 9.1) Can be equipped with: Page 18 Translation of the original operating manual - APV Tined Weeder... -
Page 19: Combination Options For The Tined Weeder With Pneumatic Seeders
1,578 kg 1,601 kg PS see Point 0 Width W Depth D Figure 14: Harrow - Top view in transport position Figure 15: Pneumatic seeder - Top view Page 19 Translation of the original operating manual - APV Tined Weeder... -
Page 20: Hydraulicdiagram
AS 600 M1 | AS 900 M1 rigid Tractor-side Implement-side Figure 16 Control unit Coupling sleeve BG 2 Coupling plug BG 2 Throttle disc 2/2-way ball valve Double-acting hydraulic cylinder for folding Page 20 Translation of the original operating manual - APV Tined Weeder... - Page 21 AS 900 M1 scissors folding | AS 1200 M1 Tractor-side Implement-side Figure 17 Control unit Coupling sleeve BG 2 Coupling plug BG 2 T-connection Locking block Throttle disc Double-acting hydraulic cylinder for folding Translation of the original operating manual - APV Tined Weeder Page 21...
-
Page 22: Lighting Circuit Diagram
The corresponding instructions for safe and proper parking of each implement version can be found under points 6.3 Safe parking AS 600 M1 / AS 900 M1 rigid and 6.4 Safe parking AS 900 M1 scissors folding / AS 1200 M1. -
Page 23: Cropping Tips For Using The Tined Weeder
Optimal adjustment of the harrow can take a lot of time. Only the potential of harrowing is described here! Ultimately, harrowing success depends on the skill and experience of the operator. Translation of the original operating manual - APV Tined Weeder Page 23... - Page 24 Many parts of the Tined Weeder are made of steel or spring steel (such as the centre frame, side frame, tine section, tines, ...) and can be accepted and recycled by a waste disposal plant. Page 24 Translation of the original operating manual - APV Tined Weeder...
-
Page 25: Accessories
With this accessories kit, the AS 600 M1 can be extended to an AS 900 M1. The working width is therefore increased from 6 m to 9 m. Item no.: 07017-2-009 Figure 21 Translation of the original operating manual - APV Tined Weeder Page 25... - Page 26 Is used to mount a pneumatic seeder with up to 500 l hopper volume on the Tined Weeder, but only in combination with the headstock accessories kit (07015-2-018). Figure 24: Headstock (07015-2-018) Page 26 Translation of the original operating manual - APV Tined Weeder...
- Page 27 Item no.: 07017-2-007 (AS 600 M1) 07016-2-032 (AS 900 M1) Figure 25: Accessories kit for AS 600 M1 and AS 900 M1 rigid Item no.: 07021-2-019 (AS 900 M1 scissors folding) 07015-2-017 (AS 1200 M1) Figure 26: Accessories kit for AS 900 M1 scissors folding and AS 1200 M1 ...
- Page 28 07016-2-053 (AS 600 M1 | AS 900 M1) in combination with headstock Figure 30 07015-2-107 (AS 1200 M1│AS 900 M1 scissors folding) in combination with headstock Figure 31 Page 28 Translation of the original operating manual - APV Tined Weeder...
- Page 29 Linkage sensor top link accessories kit MX Is used for starting and stopping the pneumatic seeder for seed application when the implement is lifted at the headlands. Item no.: 00410-2-169 Figure 34 Translation of the original operating manual - APV Tined Weeder Page 29...
-
Page 30: Index
Weight calculations ........15 Mode of action ..........18 Working depth ..........12 Mounted implements ........7 Working position ..........12 Mounting on the tractor ........10 Working speed ..........12 Page 30 Translation of the original operating manual - APV Tined Weeder... - Page 31 Notes Translation of the original operating manual - APV Tined Weeder Page 31...
- Page 32 +43 (0) 2913 / 8002 Web: www.apv.at Company details APV - Technische Produkte GmbH, Managing Director: Ing. Jürgen Schöls, Markus Alschner, Dallein 15 AT-3753 Hötzelsdorf, Austria, marketing@apv.at, www.apv.at, VAT ID no.: ATU 5067 1107 Photo credits: Company photos © APV Concept &...
Need help?
Do you have a question about the AS 600 M1 and is the answer not in the manual?
Questions and answers