APV Tined Weeder Pro VS 600 M1 Operating Manual
Hide thumbs
Also See for Tined Weeder Pro VS 600 M1:
- Operating manual (36 pages) ,
- Operating manual (40 pages)
Subscribe to Our Youtube Channel
Related Manuals for APV Tined Weeder Pro VS 600 M1
Summary of Contents for APV Tined Weeder Pro VS 600 M1
- Page 1 Version: 1.1 EN / Item no.: 00601-3-874 Operating manual for the Tined Weeder Pro VS 600 M1, VS 750 M1, VS 900 M1, VS 1200 M1 Please read carefully before initial operation! TRANSLATION OF THE ORIGINAL OPERATING MANUAL...
-
Page 2: Table Of Contents
Decommissioning the implement ................28 13.2 Storage of the implement ..................28 13.3 Disposal ........................28 Cropping tips for using the Tined Weeder Pro ..............29 Accessories ........................30 Index ........................... 35 Page 2 Original operating manual - APV Tined Weeder Pro... -
Page 3: Ce Conformity
Dallein 15, A-3753 Hötzelsdorf Product designation: Tined Weeder Pro VS 600 M1 Number: 07018-1-000 Serial number: All serial numbers of the Tined Weeder Pro VS 600 M1 Product designation: Tined Weeder Pro VS 750 M1 Number: 07019-1-000 Serial number: All serial numbers of the Tined Weeder Pro VS 750 M1... -
Page 4: Identification Of The Implement
Production number Weight Figure 2: Layout of the type plate Year of manufacture PLEASE NOTE! In cases of inquiries or warranty claims, please tell us the production number of your implement. Page 4 Original operating manual - APV Tined Weeder Pro... -
Page 5: Service
Any other use is considered to be non-intended. The manufacturer is not liable for any resulting damage, the operator alone bears the associated risk. Intended use also includes compliance with the conditions for operation, maintenance, and repairs prescribed by the manufacturer. Original operating manual - APV Tined Weeder Pro Page 5... -
Page 6: General Safety-Related Instructions And Accident Prevention Regulations
Cleaning is recommended as specified in the maintenance instructions. The procedure in in maintenance instruction must be observed and protective equipment must be used. • Working under the implement is forbidden. Page 6 Original operating manual - APV Tined Weeder Pro... -
Page 7: Mounted Implements
Before working on the hydraulic system, park the implement, depressurize the system and switch off the motor! • The securing chains should only be unhooked when they are relieved of tension! (cylinder must be filled with oil) Original operating manual - APV Tined Weeder Pro Page 7... -
Page 8: Maintenance
Repair work on the tyres may only be performed by specialists and with suitable installation tools. • Check the inflation pressure regularly. Observe the prescribed inflation pressure (4 bar)! CAUTION! Misprints, errors and omissions excepted. Page 8 Original operating manual - APV Tined Weeder Pro... -
Page 9: Safety Signs
When loading the implement, attach the ropes or chains to these points! Lift the implement off the Do not stand on the ground and slowly fold or implement while driving! unfold. Original operating manual - APV Tined Weeder Pro Page 9... - Page 10 Always switch off the engine crushing danger zone as and remove the key before long as the parts can still maintenance work! After a short period of move! operation, re-tighten all bolts and nuts. Page 10 Original operating manual - APV Tined Weeder Pro...
-
Page 11: Operating Instructions For The Tined Weeder Pro
(+). In contrast, if only one cable tie is attached to the hose, it is the return line (-). Original operating manual - APV Tined Weeder Pro Page 11... -
Page 12: Working Position And Setting The Working Depth
To set all of the feeler wheels, including those at the rear, to the same height, the same number of holes must be visible above the bracket. Figure 6: Working position Page 12 Original operating manual - APV Tined Weeder Pro... - Page 13 (e.g. Level 2). This has to be done when the implement is lowered onto the ground. CAUTION! Driving in curves is not permitted. If there is no other option, these curves must be driven in a very large radius. Original operating manual - APV Tined Weeder Pro Page 13...
-
Page 14: Hydraulic Tine Adjustment
If the plates are removed, the ground adaptation is fully available in both directions. Figure 10: Folding locking plate on the side frame Page 14 Original operating manual - APV Tined Weeder Pro... -
Page 15: Maintenance And Care
When the implement is lifted off of the ground, the two side wings of the frame should be pointing slightly down. If this is not the case or if the wings are pointing down too much, the stop bolts on the joint must be adjusted. Original operating manual - APV Tined Weeder Pro Page 15... -
Page 16: Tine Change
Figure 11: 1 = nut, 2 = plastic piece Changing the springs Overview: Diagram of the spring attachment Figure 12: Diagram of the spring attachment Plastic shell Snap-fit Fastening bolt Page 16 Original operating manual - APV Tined Weeder Pro... - Page 17 Ensure that all of the snap-fits are locked again. This is the case when the fastening bolt is pressed far enough into the hole. It may be necessary to press it in further using a bolt or a pin (8 mm diameter). Original operating manual - APV Tined Weeder Pro Page 17...
-
Page 18: Repairs And Service
Many parts of the Tined Weeder Pro are made of steel or spring steel (such as the centre frame, side frame, tine section, tines, ...) and can be accepted and recycled by a waste disposal plant. Page 18 Original operating manual - APV Tined Weeder Pro... -
Page 19: Technical Data
Top link sensor • Wheel sensor • GPSa sensor • Carbide tines • Manual tine lifting Can be equipped with: PS 120 M1 – PS 500 M2 (see Point 9.2) Original operating manual - APV Tined Weeder Pro Page 19... -
Page 20: Harrow Array Widths
Harrow array widths VS600: VS750: Figure 16: VS 600 Figure 17: VS 750 VS900: Figure 18: VS 900 VS1200: Figure 19: VS 1200 Page 20 Original operating manual - APV Tined Weeder Pro... -
Page 21: Combination Options For The Tined Weeder Pro With Pneumatic Seeders
1,500 kg 1,583 kg 1,593 kg 1,616 kg Point 15 Depth D Width W Figure 20: Harrow - Top view in transport position Figure 21: Pneumatic seeder - Top view Original operating manual - APV Tined Weeder Pro Page 21... -
Page 22: Hydraulicdiagram
Implement-side Control unit locking block Coupling sleeve BG 2 Ball valve Coupling plug BG 2 Double-acting cylinder for tine adjustment T-connection Double-acting cylinder for folding 3-way flow divider Figure 22 Page 22 Original operating manual - APV Tined Weeder Pro... - Page 23 Implement-side Control unit Locking block Coupling sleeve BG 2 Ball valve Coupling plug BG 2 Double-acting cylinder for tine adjustment T-connection Double-acting cylinder for folding 3-way flow divider Figure 23 Original operating manual - APV Tined Weeder Pro Page 23...
- Page 24 Coupling sleeve BG 2 Lift limiter Coupling plug BG 2 Double-acting cylinder for folding, inside T-connection Double-acting cylinder for tine adjustment 7-way flow divider Double-acting cylinder for folding, outside Locking block Figure 24 Page 24 Original operating manual - APV Tined Weeder Pro...
-
Page 25: Road Transport Of The Tined Weeder Pro
• Only relieve the hydraulic hose at home by putting the tractor control unit into float position. • Also ensure than none of the safety splints were lost during operation. Original operating manual - APV Tined Weeder Pro Page 25... -
Page 26: Calculation Of The Weight Ratios
Now enter the calculated actual front axle load and the permissible front axle load specified in the tractor operating manual in the table on the following page. Page 26 Original operating manual - APV Tined Weeder Pro... - Page 27 (2 tyres) Minimum ballast front/rear kg ≤ Total weight kg ≤ kg ≤ Front axle load kg ≤ kg ≤ Rear axle load Original operating manual - APV Tined Weeder Pro Page 27...
-
Page 28: Lighting Circuit Diagram
The implement must be stored in a dry place protected from weather conditions to ensure that it remains functional even if it is stored for a longer period of time. 13.3 Disposal Disposal of the implement must be performed according to the local disposal regulations for machines. Page 28 Original operating manual - APV Tined Weeder Pro... -
Page 29: Cropping Tips For Using The Tined Weeder Pro
Optimal adjustment of the harrow can take a lot of time. Only the potential of harrowing is described here! Ultimately, harrowing success depends on the skill and experience of the operator. Original operating manual - APV Tined Weeder Pro Page 29... -
Page 30: Accessories
Figure 28 • Mounting kit for PS 120 – 500 M2 Is used to mount a pneumatic seeder (with up to 500 litres hopper volume). Item no.: 07014-2-503 Figure 29 Page 30 Original operating manual - APV Tined Weeder Pro... - Page 31 If feeler wheels are used at the rear in combination with a mounting kit for PS 120-500 M2, this platform kit must be used. Item no.: 07014-2-510 Figure 31 Original operating manual - APV Tined Weeder Pro Page 31...
- Page 32 Item no.: 07000-2-059 Figure 34 Page 32 Original operating manual - APV Tined Weeder Pro...
- Page 33 07018-2-034 VS 600 ZBK tine HM VS600 07019-2-012 VS 750 ZBK tine HM VS750 07020-2-036 VS 900 ZBK tine HM VS900 07014-2-299 VS 1200 ZBK tine HM VS1200 Figure 36 Original operating manual - APV Tined Weeder Pro Page 33...
- Page 34 Individual tine lifting 07014-2-351 ABK tine holder 8 mechanis mm 19 To actuate the tine lifting mechanism, lift the tine and simply push the plate towards the tine. Figure 38 Page 34 Original operating manual - APV Tined Weeder Pro...
-
Page 35: Index
Weight calculations ........26 Mounting ............11 Working depth ..........13 Mounting kit ............ 30 Working position ........12, 29 Nature conservation and environmental Working speed ..........12 protection ............ 18 Original operating manual - APV Tined Weeder Pro Page 35... - Page 36 +43 (0) 2913 / 8002 Web: www.apv.at Company details APV - Technische Produkte GmbH, Managing Director: Ing. Jürgen Schöls, Markus Alschner, Dallein 15 AT-3753 Hötzelsdorf, Austria, marketing@apv.at, www.apv.at, VAT ID no.: ATU 5067 1107 Photo credits: Company photos © APV Concept &...
Need help?
Do you have a question about the Tined Weeder Pro VS 600 M1 and is the answer not in the manual?
Questions and answers