Chapter 17. Installing The Rack Mount Kit; Installing The Rails - Nvidia DGX A100 Service Manual

Chapter 17. Installing the Rack Mount
17.1. Installing the Rails
Follow these instructions to install the DGX A100 server rack mount kit. The rack mount
kit acts as a shelf in the rack, it does not allow the system to be moved once installed. All
components are serviceable from the front or rear, so this movement is not necessary.
Item Description
1 Bottom lip to support the DGX A100.
2 Prongs that enter the holes of the rack. Holes can be square or round.
3 Metal clips that hold the rail in place.
4 Thread for securing the rack mount kit to the rack. Two types of screws are provided.
‣
Flat head: Must be used along with the provided washers at the front of the rack so that
the DGX A100 can be installed flush to the rack.
‣
Pan or round head: Must be used at the rear of the rack.
NVIDIA DGX A100 System
Kit
DU-10044-001 _v01 | 70