Replacing And Returning The Front Fan Module - Nvidia DGX A100 Service Manual

There are two fans in the fan module, identified by
SPD_FAN_SYSn_R
must be replaced.
2. Use NVSM to confirm the fan issue.
sudo nvsm show fans
$
In the output, look for the 'unhealthy' status for the same fan.
2.3. Replacing and Returning the Front
Fan Module
1. Remove the new fan module from its packaging and be ready to install it.
2. Remove the failed fan module by pressing on the release button on the top of the module
and pulling on the handle.
NVIDIA DGX A100 System
, where is the module ID. If either fan fails, then the entire module
n
Front Fan Module Replacement
and
SPD_FAN_SYSn_F
DU-10044-001 _v01 | 5