Replacing The Vertical Network Card - Nvidia DGX A100 Service Manual

Note the slot ID for ordering and replacing.
3. Order the appropriate card type as indicated in the following table, then follow the
corresponding replacement instructions.
Table 1. Network Card Slot IDs
Slot ID
0-3, 6-9
4
5
13.3. Replacing the Vertical Network Card
Before attempting to replace any of the network cards, be sure to have performed the
following:
‣
Determined the location ID of the faulty network card needing replacement.
See Identifying the Failed Network
‣
Obtained the replacement network card and have saved the packaging for use when
returning the faulty component.
CAUTION: Static Sensitive Devices: - Be sure to observe best practices for electrostatic
discharge (ESD) protection. This includes making sure personnel and equipment are
connected to a common ground, such as by wearing a wrist strap connected to the
chassis ground, and placing components on static-free work surfaces.
1. Power down the system.
2. Label all network, monitor, and USB cables connected to the motherboard tray for easy
identification when reconnecting.
3. Unplug all power cords, and all network, monitor, and USB cables.
NVIDIA DGX A100 System
Card Type
Single port
Dual-port vertical
Dual-port horizontal
Card.
Network Card Replacement
Replacement Instructions

Replacing the Vertical Network Card

Replacing the Vertical Network Card
Replacing the Horizontal Network
Card
DU-10044-001 _v01 | 54