Rebuilding The Boot Drive Raid 1 Volume - Nvidia DGX A100 Service Manual

9. Install the assembled module on the motherboard by inserting the riser card in its slot.
10.Close the motherboard tray lid and then install the motherboard tray.
Refer to the instructions in the section
11.Connect all the cables to the motherboard tray, connect all power cords, then power on
the system.
Rebuild the RAID 1 array according to the instruction in the section
RAID 1 Volume.
9.4. Rebuilding the Boot Drive RAID 1
Volume
After replacing a faulty M.2 OS drive, you must rebuild the RAID 1 array.
NVIDIA DGX A100 System
Replacing the Motherboard
M.2 NVMe Boot Drive Replacement
Tray.
Rebuilding the Boot Drive
DU-10044-001 _v01 | 37