Assembly
Fig. 9: Assembling the SSD (5)
(6) - Circuit board holder
(7) - Cable duct
13. Assemble the circuit board holder (6) to the base plate of the machine
14. Lay the cables in the cable duct (7).
Fig. 10: Assembling the SSD (6)
(6) - Circuit board holder
(7) - Cable duct
(9) - Cover
(10) - Hose
(11) - Valve connector (X22)
15. Tighten the cover (16) to the circuit board holder (6) using M4x10
16. Clip the cover (9) onto the cable duct (7).
17. Slip hoses (10) and (12) onto the solenoid valve (13).
18. Slip valve connectors (11) and (14) onto the solenoid valve (13).
Additional Instructions D867 - 00.0 - 04/2020
⑦
using M4x10 screws (8).
While tightening the screws, make sure not to pinch any cables.
⑨
⑩
⑪
⑫
⑬
screws (15).
⑥
(8) - Screws
⑭
⑮
(12) - Hose
(13) - Solenoid valve
(14) - Valve connector (X23)
(15) - Screws
(16) - Cover
⑧
⑯
11