DURKOPP ADLER D867 Additional Instructions page 17

Software settings
Icon
Additional Instructions D867 - 00.0 - 04/2020
Description
Test the skip stitch counter
• Check: Switch to the display Stitch counter skip stitch and simulate
a thread cycle; the counter is incremented each time the thread
passes through
Test the value of the skip stitch counter
• Check: Switch to the display Value skip stitch counter and simulate
a thread cycle
With the proper setting, the value of the skip stitch counter must
be > 1500.
Test the degree of soiling
Display of the degree of soiling in %
If the degree of soiling rises above 80%, the display will show a
warning. In this case, the SSD needs to be cleaned  p. 16
15