DURKOPP ADLER D867 Additional Instructions page 12

Fig. 7: Assembling the SSD (3)
(3) - Cable
10. Fit the SSD PCB (4) with the following components:
Fig. 8: Assembling the SSD (4)
⑤
(5) - Spacer
11. Slip the spacers (5) onto the circuit board holder (6) and fix them in
12. Press the PSB (4) onto the circuit board holder (6) until it locks into
10
③
④
• Insert jumpers (X6, X7) as shown above: open
• Plug of cable (3): Slot X1
• Light conductor SDÜ: Slot X2
• Light conductor UK: Slot X3
• Light conductor RFW: Slot X4
place by pushing them down.
place.
SDÜ UK RFW
(4) - PCB
(6) - Circuit board holder
Additional Instructions D867 - 00.0 - 04/2020
Assembly
⑤
⑥