Main Board; Service Position - Sony CDX-G1200U Service Manual

3-5.

MAIN BOARD

Note: When the complete MAIN board is replaced, the destination
setting is necessary. Refer to "DESTINATION SETTING
METHOD" on page 4.
1 two ground point screws
(PTT2.6 6)
3 claw
3 claw
CDX-G1200U/G1201U/G1202U/G1280UM
2 two screws
(PTT2.6 8)
4 MAIN board
3 claw
3-6.

SERVICE POSITION

Note 1: The service position below cannot be performed with the fl ex-
ible fl at cable (length: 80 mm) used with the unit. Refer to
"NOTE OF PERFORMING THE OPERATION CHECK" in
the servicing notes, and use a long fl exible fl at cable (length:
150 mm).
OK
CD mechanism deck
insulating
sheet
stand
flexible flat cable (27 core)
(length: 150 mm)
Note 2: Do not flexible flat cable (27 core) is
damaged by the edge of the chassis.
NG
CD mechanism deck
Note 3: CD mechanical deck should
not be placed vertically.
flexible flat cable (27 core)
(length: 150 mm)
NG
CD mechanism deck
Note 4: CD mechanical deck should
not be placed upside down.
flexible flat cable (27 core)
(length: 150 mm)
15 15
CDX-G1200U/G1201U/G1202U/G1280UM
OK
CD mechanism deck
main unit main unit flexible flat cable (27 core)
(length: 150 mm)
Note 2: Do not flexible flat cable (27 core) is
damaged by the edge of the chassis.
NG
CD mechanism deck
Note 3: CD mechanical deck should
not be placed vertically.
main unit
main unit
main unit
insulating sheet
stand
flexible flat cable (27 core)
(length: 150 mm)