Sony CDX-G1200U Service Manual page 10

CDX-G1200U/G1201U/G1202U/G1280UM
Power connection diagram
Make sure your car's auxiliary power
connector, and match the connections of
cords correctly depending on the car.
Auxiliary power connector
Common connection
Red Red
Yellow Yellow
continuous power
12 Yellow
supply
15 switched power supply Red
When the positions of the red and
yellow leads are inverted
Red Red
Yellow Yellow
12 switched power supply Yellow
continuous power
15 Red
supply
When the car without ACC position
Red Red
Yellow
Yellow
After matching the connections and
switching power supply leads correctly,
connect the unit to the car's power supply. If
you have any questions and problems
connecting your unit that are not covered in
this manual, consult the car dealer.
10
Installation
Removing the protection collar
and the bracket
Before installing the unit, remove the
protection collar and the bracket
the unit.
1
Pinch both edges of the protection
collar , then pull it out.
2
Insert both release keys until they
click, and pull down the bracket
then pull up the unit to separate.
Face the hook inwards.
Mounting the unit in the
dashboard
Before installing, make sure the catches on
both sides of the bracket
inwards 2 mm ( 3 /
32
1
Position the bracket
dashboard, then bend the claws
from
outward for a tight fit.
2
Mount the unit onto the bracket
then attach the protection collar
,
Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
are properly engaged in the slots of the unit.
Fuse replacement
When replacing the fuse,
be sure to use one
matching the amperage
rating stated on the
original fuse. If the fuse
blows, check the power
connection and replace the
fuse. If the fuse blows again after
replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
are bent
in).
inside the
182 mm (7 1 / in)
4
53 mm (2 1 / in)
8
Catch
,
.
Fuse (10 A)