CDX-G1200U/G1201U/G1202U/G1280UM
3-3.
SUB PANEL ASSY
3 sub panel assy
Note: When installing the sub panel assy,
3-4.
CD MECHANISM DECK (MG-101CF-188)
Note 1: The service manual of the mechanism deck, used in this mod-
el has been issued in a separate volume. Please refer to the
service manual of the MG-101 series for the mechanism deck
information.
CD machanism block
1 flexible flat cable
(27 core) (FFC1)
(CN401)
2 flexible flat cable
(27 core) (FFC1)
(CN1005)
4 Align the rib
and slot.
4 Align the rib
3
Note 3: When installing the flexible flat cable (27 core) (FFC1), insert straight to the connector and lock a connector completely.
No slanting after insertion.
OK
Insert is straight to the interior.
flexible flat cable
(27 core) (FFC1)
connector
14
2 two claws
align two ribs and two holes.
1 two screws
(PTT2.6
6)
7 CD mechanism deck
(MG-101CF-188)
This side is
the terminal
side.
and slot.
4 flexible flat cable
(27 core) (FFC1)
(CN401)
NG
Connector is unlock.
flexible flat cable
(27 core) (FFC1)
connector
rib
hole
hole
rib
Note 2: When installing the CD
6 bracket (CD)
1 screw
(PTT2.6
6)
slot
NG
Insert is incline
flexible flat cable
(27 core) (FFC1)
connector
2 two claws
mechanism block,
align the rib and slot.
5 two screws
(PTT2.6
4)
Note 2: When installing the
CD mechanism block,
align the rib and slot.
2 Lift up the CD mechanism
block in the direction of
the arrow.
slot
1 screw
(PTT2.6
3 connector
(CN1005)
NG
Insert is shallow
flexible flat cable
(27 core) (FFC1)
connector
6)