Intended Use; Using The Bluetooth Function - Hella Gutmann Mega Macs 77 Quick Start Manual

mega macs 77
2. Take the device out of the packaging.
EN
3. Check the device for mechanical damage and shake it slightly to ensure that there are no loose parts inside.
3.2

Intended Use

The mega macs 77 is a mobile device for detecting and rectifying faults in automotive electronic systems.
The device enables access to extensive technical data such as wiring diagrams and service data, set values and
descriptions of vehicle systems. A lot of this data is transferred to the device directly from the Hella Gutmann
diagnostic database via online connection. Therefore, the device must be permanently online.
The device is not suitable for repairing electrical machines and tools or home electrics. Diagnostic devices from other
manufacturers will not be supported.
If the device is used in a way not authorized by Hella Gutmann, the safety of the device may be influenced.
The device is intended for industrial use. Outside of industrial environments, e.g. in commercial areas or in the center
of a town, radio interference suppression measures may be necessary.
3.3

Using the Bluetooth Function

The terms of use of the Bluetooth function may be restricted or prohibited through law or corresponding legal
regulations in certain countries.
Pay attention to the provisions in force in the respective country before using the Bluetooth function.
36
CAUTION
Danger of short circuit due to loose parts in or on the device
Danger of destruction of the device/the automotive electronics
Never put the device into operation if you suspect that there are loose parts in or on it. Please
contact the Hella Gutmann repair service or a Hella Gutmann trading partner immediately in
this case.
Product Description
Intended Use