Product Description; Intended Use; Delivery Contents; Checking Delivery Contents - Hella Gutmann Radaufnehmer Control Operating Instructions Manual

Hella Gutmann

2. Product Description

2.1. Intended Use

The wheel clamp module Control is a system for quickly checking thrust lines. It is suitable for all vehicle manufacturers.
The wheel clamp module control does not substitute axle alignment procedures.
The wheel clamp module Control can be operated only in connection with the wheel clamp 1st GEN / Wheel clamp
module SE / Wheel clamp module WA.

2.2. Delivery Contents

Quantity Name
1 Wheel clamp module Control
Operating instructions
1

2.2.1. Checking Delivery Contents

Please check the delivery contents upon receiving your device so that complaints can be issued immediately regarding any
potential damage.
Proceed as follows to check the delivery contents:
1. Open the package supplied and check for completeness based on the delivery slip. Should you identify any damage to
the package, then open the package in the presence of the delivery service and check the wheel clamp module Con-
trol for hidden damage. Any transport damage to the package supplied and damage to the wheel clamp module Con-
trol shall be registered in a damage report by the delivery service.
2. Remove the wheel clamp module Control from the packaging.
3. Check the wheel clamp module Control for damage and completeness.
Radaufnehmer Control
Product Description | 2.
19