Connections Of The Mega Macs 77 - Hella Gutmann Mega Macs 77 Quick Start Manual

mega macs 77
3.7

Connections of the mega macs 77

EN
4
5
6
7
8
9
10
11
12
13
38
D D e e s s i i g g n n a a t t i i o o n n
USB device interface
Use the USB device interface for data exchange between the PC and the device.
2x USB host interface
The USB host interfaces (USB interfaces for short) can be used to connect external tools such as a
printer.
Power supply socket
This is the power supply of the device and internal battery charge connection.
ON/OFF button
Switch the device on or off.
Additional module slot
Another module can be inserted here.
Positioning handle
Using the positioning handle, the device can be set up, carried or fixed to the steering wheel in the
vehicle.
Oscilloscope 1 connections
Connect a test lead to Scope 1.
• blue = signal
• black = ground
ST3 connection
Connect additional measuring instruments such as a clamp meter here.
Oscilloscope 2 connections
Connect a test lead to Scope 2.
• red = signal
• black = ground
Measurement module MT 77
This module contains a 2-channel oscilloscope for measured variables such as the following:
• Voltage
• Current (with current clamp)
• Resistance
Product Description
Connections of the mega macs 77