Intended Use; Using The Bluetooth Function - Hella Gutmann mega macs PC Quick Start Manual

Product description

Intended use

2. Take the PC VCI out of the packaging.
3. Check the PC VCI for mechanical damage and shake it lightly to ensure
that there are no loose parts inside.
3.2 Intended use
The mega macs PC software and the PC VCI form a system which is used
for detecting and rectifying faults in automotive electronic systems.
It uses a diagnostic interface to establish a connection to the automotive
electronics and to provide access to descriptions of the vehicle system. A
lot of this data is transferred to the PC directly via an Internet connection
from the Hella Gutmann diagnostic database. Therefore, the PC should be
permanently online.
The mega macs PC software is not suitable for repairing electrical
machines and tools or home electrics. Diagnostic devices from other
manufacturers will not be supported.
If the mega macs PC software and the PC VCI is used in a way not
authorized by Hella Gutmann the protection of the device may be
influenced.
The PC VCI is intended for industrial use. Outside of industrial
environments, e.g. in commercial areas or in the centre of a town, radio
interference suppression measures may need to be taken.
3.3

Using the Bluetooth Function

The terms of use of the Bluetooth function may be restricted or prohibited
through law or corresponding legal regulations in certain countries.
8
CAUTION
Danger of short circuit due to loose parts in or on the PC
VCI
Danger of destruction of the PC VCI and/or the automotive
electronics
Never put the PC VCI into operation if you suspect that
there are loose parts in or at the module. Please contact
the Hella Gutmann repair service or a Hella Gutmann
trading partner immediately in this case.
mega macs PC