Checking Delivery Contents; Intended Use; Using The Bluetooth® Function - Hella Gutmann MT-HV Operating Instructions Manual

MT-HV

4.1.4 Checking Delivery Contents

Please check the delivery contents upon receiving your device so that complaints can be issued immediately regarding
any potential damage.
Proceed as follows to check the delivery contents:
1. Open the package supplied and check for completeness based on the delivery slip.
Should you identify any damage to the package, then open the package in the presence of the delivery service and
check the MT-HV for hidden damage. Any transport damage to the package supplied and damage to the MT-HV
shall be registered in a damage report by the delivery service.
2. Take the MT-HV out of the packaging.
CAUTION
Danger of short circuit due to loose parts in or at the MT-HV
Danger of destruction of the MT-HV and/or the automotive electronics
Never put the MT-HV into operation if you suspect that there are loose parts in or at the
module. In this case please contact the Hella Gutmann repair service or a Hella Gutmann
trading partner immediately.
3. Check the MT-HV for mechanical damage and shake slightly to ensure that there are no loose parts inside.
4.2

Intended Use

The MT-HV is a mobile measurement module with which you can measure voltage, current, resistance and pressure.
You can use the MT-HV both for measuring high voltages and low voltages. Use the installed high-voltage
measurement module for high-voltage measurements. You can insert another measurement module into the MT-HV
for low-voltage measurements.
The MT-HV can be operated only in connection with the mega macs X of Hella Gutmann. The communication between
the mega macs X and the MT-HV is realized via Bluetooth®. Diagnostic devices from other manufacturers will not be
supported. The MT-HV is not suitable for the following repair work/voltage measurements:
• Electric appliances and devices
• Home electrics
• Power supply systems/line voltage
If the MT-HV is used in a way not authorized by Hella Gutmann, the protection of the MT-HV and the mega macs X may
be influenced.
4.3 Using the Bluetooth® Function
NOTICE
Alternatively, you can also operate the MT-HV with USB cable connected to the mega macs X.
The terms of use of the Bluetooth® function may be restricted or prohibited through law or corresponding legal
regulations in certain countries.
Pay attention to the provisions in force in the respective country before using the Bluetooth® function.
Device Description
Delivery contents
Device Description
Intended Use
Device Description
Using the Bluetooth® Function
EN
41