Table of Contents
Advertisement
Assembling the seat element will happen in reverse order as described above.
The seat of the Gemini can only be extended with additional elements after approval of your
retailer.
3.7
Tyre changing
L L L L
NOTE:
Always make sure that the wheels are sufficiently inflated, since it could
affect the driving behaviour.
L L L L
NOTE:
We do not accept any liability for wheels not supplied by the
manufacturer.
L L L L
NOTE:
There must be no air in the tube before it can be removed.
L L L L
CAUTION:
Chance of damage - If handled improperly, the rim might be damaged.
Rather let an expert perform these activities.
If you want to change the tyres or inner tubes, you should note the following:
1.
Let all the air out of the inner tube.
2.
Insert a tyre lever between the tyre and the rim.
3.
Slowly and gently push the tyre lever downwards. This will pull the tyre over the edge
of the rim.
4.
Then move the lever along the rim, the tyre will jump out.
5.
Now carefully remove the tyre from the rim and then remove the tube.
L L L L
NOTE:
Only an expert can guarantee correct assembly. Work not done by your
specialist dealer, would void the warranty of claims.
L L L L
WARNING:
Chance of damage and injury - When mounting a tyre, make sure no
objects or body parts are pinched between the tyre and the rim.
L L L L
CAUTION:
Chance of damage - When inflating the tyres, always check that the
pressure is correct. The correct pressure is given on the tyre walls.
L L L L
CAUTION:
Chance of damage - Use only inflating equipment which complies
with regulations and indicates the pressure in bar, or use the supplied air pump.
We do not accept any liability for damage caused by inflating equipment not
supplied by the manufacturer.
Note the following before inserting the new inner tube:
Page 20
Gemini
2011-11
Advertisement
Table of Contents
