Table of Contents
Advertisement
Gemini 40 and 45:
GEMINI 40 and 45 stroller design also provides an angle adjustment of the seat frame.
A wide range in adjustments allows the Gemini to be positioned in many ways. From an
almost vertical position (ideal for revalidation) till a laying position. By tightening the
adjustment bars, the full seating part will be unmovable.
3.6.3 Mounting the seat element
L L L L
CAUTION:
Risk of injury - Check if the clamps are mounted correctly on the
frame during the placement of the seat element.
L L L L
CAUTION:
Risk of injury - Make sure the locking clamps are locked before
you push your child in the Gemini.
L L L L
CAUTION:
Risk of clamping - Make sure no fingers, buckles or clothes are
squeezed between the seat element and the supportive part of the Gemini.
L L L L
CAUTION:
Risk of injury - Switching the direction of the seat is only allowed
when the child is no longer present in the Gemini!
L L L L
CAUTION:
Risk of injury - Do not use the Gemini without the seat element.
L L L L
CAUTION:
Risk of injury - Check all connections, screws are secured before
using the Gemini.
The Gemini stands for comfort when it comes to removing or switching positions of the
seating element. As such, you can push the Gemini with your child facing forward or facing
towards you.
The seat element will be disassembled as follows:
•
Use the brakes to make the Gemini unmovable.
•
Unlock the two clamps in the rear part.
•
Slide the full element backwards and pull vertically upwards while holding on to the side
supports.
To adjust the angle of the seat use instructions below:
1. Pull the plunger
2. Move the seat frame until the desired inclination (6
different positions in steps of 10 mm).
3. Loosen the plunger
position.
4. Check that the plunger
Page 19
just below the seat frame.
until it clicks automatically in
is well fixated.
Gemini
2011-11
Advertisement
Table of Contents
