Table of Contents
Advertisement
A brake with blocking clamps which will be pushed against the wheel when the pedal is
being pushed. By pushing on the upper pedal, the brake will be released.
A good performance of the breaks depends on the correct tyre pressure.
If the brakes have lost their effectiveness because of wear and tear and/or damage to the
tyres and inner tubes, we advise you to consult your specialist dealer to renovate the
system, since he has suitable tools and knowledge.
Improper maintenance or the use of unsuitable tools might cause damage and/or loss of
function.
2.5
Wedge (B22)
By default, a wedge, covered with textile, is mounted on the seating element. It will prevent
your child from sliding out of the Gemini. The wedge has been mounted by a screw (M6). It
can easily be adjusted by loosening/tightening the screw.
The usage of the wedge depends on the physical and mental condition of your child.
2.6
Safety belts
L L L L
WARNING:
Risk of injury – Make sure all the safety belts are locked into place
before driving the Gemini.
Every Gemini has been equipped with adjustable belt to the purpose of a correct and safe
seating position. These belts have an adjustable length and are mounted to the seating
frame. The ends are connected to each other by means of a central lock.
After applying the safety belts to your child, you need to hear an auditable clicking sound to
make sure the belts are locked into place. Push the buttons on the locks to release them
again. The belts can only be adjusted after the locks are into place.
Adjusting the safety belts
Adjusting the length of each belt is done individually by shortening or extending the length of
each belt by means of the buckles.
Page 8
Gemini
2011-11
Advertisement
Table of Contents
