Using End Of Cycle Signal And Finish Guard Cycle Selector - Whirlpool DRYERS Use & Care Manual

Using end of cycle signal and
FINISH GUARD' cycle selector
(on some models)
If your model has an End of Cycle signal and
FINISH GUARD cycle selector, these features
may be turned on or off. Follow these
instructions:
NOTE: The FINISH GUARD cycle operates at
the end of your automatk cycle unless you
have turned it off.
Ii your model has a knob s4hctor:
The top setting refers to the End of Cycle signal
and the bottom setting refers to the FINISH
GUARD cycle.
Posltlon 1:
End of Cycle signal and FINISH GUARD cycle
turned off.
Posltlon 2:
End of Cycle signal turned off and FINISH
GUARD cycle turned on.
Posltlon 3:
End of Cycle signal turned on and FINISH
GUARD cycle turned off.
Posttlon 4:
End of Cycle signal turned on and FINISH
GUARD cycle turned on.
For example, both features are off when the
knob is turned to the far left. Both features are
on when the knob is turned to the far right.
Pooition 3 Pomith 4
11