End Of Cycle Signal; End Of Cycle Signal And Finish Guard* Feature - Whirlpool 3405792 Use And Care Manual

OPER A T IN G YO UR D R Y E R

End of cycle signal

(on some models)
The dryer sounds a signal to let you know
when the cycle is finished. The signal is
helpful when you are drying permanent
press, synthetics, and other items that
should be removed from the dryer as soon
as it stops. The End of Cycle On/Off Selec-
tor is part of the Start Button, as shown.
NOTE: Unless you turn the Selector to Off,
the end of cycle signal sounds at the end of
the drying cycle.
End of cycle signal and FINISH GUARD*
feature
(on some models)
You can turn the End of Cycle signal and
FINISH GUARD feature on and off.
NOTE: Unless you turn Off the Selectors
for the FINISH GUARD feature and End of
Cycle signal, they operate at the end of the
drying cycle.
12
End of Cycle Signal
Off On
Push to Start
On Off On
Finish Guard Cycle Signal
CLEAN TOUCH* panel
OR
Off On
Finish Guard
Rotary knob
Off