Cycle Control Knob And A Temperature Selector (4 Clean Touch Settings) - Whirlpool DRYERS Use & Care Manual

Cycle control knob and a temperature selector
(4 CLEAN TOUCH" settings)
Cycle con&l knob
Temperature sol&or
FthlSH GUARD.
Start. button
End of cycle sektor
If your dryer has a Temperature Selector with
4 temperature settings (ex low, low, med,
high), refer to the chart below and the chart on
page 9 for cycle information.
Loads tumble without heat during the last
few minutes of all heated cycles. This makes a
load easier to handle and helps keep wrinkles
from setting in.
Uslng your automatk cycle
Use your automatic cycle and a heat setting to
automatically dry most loads. The chart below
suggests heat settings for various types of
loads.
Uslng Heavy Dry
(on some models)
Use Heavy Dry and a high heat setting to dry
large items or items that are thicker or heavier
than a regular load (heavy cotton bath sheets
or robes).
NOTE: To help reduce wrinkling, remove the
load from the dryer as soon as tumbling stops.
This is important for permanent press, knits
and synthetic fabrics. Do not overdry.
Overdrying can cause shrinkage, static cling,
and damage some fabrics.
TYPE OF LOAD
AUTOMATIC CYCLE
COlTONS AND LINENS
Extra Heavy-Bedspreads, mattress pads, quilts
Heavyweight-Towels, jeans, corduroys, work clothes
Mediumweight-Sheets, cotton undenrvear, diapers
Lightweight-Batistes, organdies, lingerie
HIGH
HIGH
MED
LOW
PERMANENT PRESS, SYNTHETICS AND BLENDS
Heavyweight-Work clothes, jackets, raincoats
Mediumweight-Shirts, play clothes, sheets, slacks
Lightweight-Lingerie, blouses, dresses
HIGH
MED
LOW
KNITS
Heavyweight-Cottons, rayons, blends, T-shirts, slacks,
shirts
MediumweightSynthetics (polyester, acrylic, etc.), dress
slacks, skirts, sweaters
LightweightSynthetics (polyester, acrylic, etc.) and
blends, lingerie, blouses, dresses
DELICATE FABRICS
Sheer curtains (2 or 3 panels), gauze, lace, etc.
HIGH
MED
EX LOW
EX LOW