Table of Contents
Advertisement
05/2013
Operation in comfort mode
• For using the comfort mode, the software of all video indoor stations in the system must
be prepared for the comfort mode.
• For the operation please see the manual or product information of the video indoor sta-
tion.
• Combining devices without corresponding software extensions with devices with corre-
sponding software extensions is not permitted.
All devices within the system have to work in the same mode!
!
The combination of devices with different modes is not permitted!
Commissioning
• Pull out foil stripes in the direction of the arrow carefully.
Keep the remote control
We recommend to fix the infrared remote control after the finished commissioning with the
help of the enclosed self-adhesive bracket near the image buffer where it can be accessed
only by qualified persons, e.g. at the inside of the door of the control cabinet or distribution
box.
Battery exchange
For the infrared remote control you need 1 button cell battery CR2025 (DC3.0 V).
1. Remove the battery cover at the backside of infrared remote control.
2. Observe the polarity of the batteries and die "+/-" markings in the battery slot.
3. Insert the batteries.
4. Place the cover.
Information on disposal for batteries
Used batteries must not be disposed in domestic waste!
They must be disposed at a collection point for old batteries.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129 • Mail: hotline@tcsag.de
21
Infrared remote control
Subject to technical changes.
PI_FVM1000-0400_uk.doc
Version: 1
Advertisement
Table of Contents
