05/2013
End the programming
Enter
or
Wait
Finished
Programming with TCSK01
Via Service Device TCSK-01 no programming can be realised!
Setting the image quality
A reduced image quality because of conduction loss within the system can be improved by
setting the amplification of the video signal at the device.
• Turn the brightness control clockwise until the brightness is optimal.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129 • Mail: hotline@tcsag.de
19
* 9 #
or
• no programming is realised for 2 min
• A positive acknowledgement tone sounds,
the yellow LED lights up for 3 s
the yellow LED expires
Settings
Subject to technical changes.
PI_FVM1000-0400_uk.doc
Version: 1