Table of Contents
Advertisement
Activate light
switch function*
Deactivate light
switch function*
*) That the LED is blinking does not mean, that the device is in programming mode.
System is operating, LED is ON
Switch ON the programming mode
of the system
Switch OFF the programming mode
of the system
Error pattern
Speaking at the indoor station
is very quiet.
TCS TürControlSysteme AG: www.tcsag.de
TCS Hotline Germany Mail: hotline@tcsag.de
7
Programming
Operation
Shortly press
RUN/PROG-button
LED blinks
Shortly press
RUN/PROG-button
LED is ON
FAQ
Possible cause
By interchanging or short-circuit
of the a-P-wires, a resistor at the
VBVS05 was damaged.
Our suggested solution
VBVS05 repair (replace)
Subject to technical changes.
PI_VBVS05-uk - uk
11/2012
Advertisement
Table of Contents
