Only In One-Family-Home And Basic Mode: Set The Function Key Of The Indoor Station; Configuration; Configuration Options - TCS FVM1000 Product Information

05/2013
error cause
SD card is missing, de-
fect or full
a- and P-wire are inter-
changed or short circuit-
ed
a-wire is not connected
or not supplied
button WE is stuck
(press longer than 15 s)

Only in one-family-home and basic mode: set the function key of the indoor station

The function key of the indoor station must be assigned with the control function 8.
!
The control function 8 is not allowed to be used anywhere else in the TCS system.

Configuration options

function
set the operation mode
set delay time for automatic record-
ing
set the number of images for the au-
tomatic images series after a door
call
determine the video-AS-address for
the automatic recording
encoding for image buffering on / off
reload to factory settings
set time, date
change the master code
The configuration of the FVM1000 is realised via the integrated IR-receiver and an IR re-
mote control (enclosed) or with the configuration software configo™.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129 • Mail: hotline@tcsag.de
indication
error tone
error mode
LED, red
flashes

Configuration

manually
9
solution
plug-in or change the SD card
exchange a- and P-wire or eliminate short-circuit,
LED expires
connect a- resp. M-wire or establish power sup-
ply, LED expires
loosen button, device is in stand-by mode again
infrared remote
control
- x
- x
- x
- x
- x
x x
- x
- x
Subject to technical changes.
PI_FVM1000-0400_uk.doc
TM
configo
(as of version 1.6.xx)
x
x
x
x
x
x
x
x
Version: 1